AMSOIL Dominator® Coolant Boost (RDCB)
 Dominator® Coolant Boost (RDCB)

Provides Effective Heat Transfer and Enhanced Corrosion Protection. Formulated with proprietary tiered surfactant technology, providing quick and effective heat transfer inside radiator and cylinder heads, which results in reduced operating temperatures, more efficient operation, increased horsepower and significantly reduced engine warm-up times in cold weather.

Product Code: RDCB • Brand: AMSOIL




MSDS Data Sheet

Product Details Reviews & RatingRelated Videos

Product Applications
Recommendations: Use DOMINATOR® Coolant Boost with racing applications using straight water as coolant as well as automotive applications using 50/50 antifreeze/water mixtures.

Directions: With engine off and cool, make sure cooling system is filled with selected coolant. Shake bottle and pour calculated amount of Coolant Boost into radiator. Start engine, turn heat on high and run for 15 minutes.

Dosage: For straight water applications, add 2 fl. oz. of Coolant Boost per quart of water. In antifreeze mixtures, add 1 fl. oz. of Coolant Boost per quart of antifreeze.

Frequency: In applications using Coolant Boost with straight water, drain and re-fill the coolant system and add Coolant Boost once per year.

In applications using Coolant Boost with antifreeze/water mixtures, add Coolant Boost once per year or every 30,000 miles, whichever comes first. Follow coolant manufacturer recommendations for coolant change intervals.

Product Description
Racers demand lower engine operating temperatures in order to achieve maximum efficiency and horsepower on the track. Many racers use straight water as a coolant, which invites damaging radiator and water-pump corrosion. AMSOIL DOMINATOR® Coolant Boost (RDCB) provides racers and motorists with significantly lower engine operating temperatures, quicker warm-up times and advanced corrosion protection.

DOMINATOR Coolant Boost is formulated with proprietary tiered-surfactant technology, providing quick and effective heat transfer inside radiators and cylinder heads and resulting in reduced operating temperatures, more efficient operation, increased horsepower and significantly reduced engine warm-up times in cold weather and before a race. Coolant Boost also contains a robust mixture of corrosion inhibitors that protect the radiator, heater core, water pump, cylinder heads, engine block and intake manifold from the damaging effects of corrosion.

Temperature Reduction Dynamometer Test
To test temperature-reduction capabilities, controlled engine dynamometer (dyno) tests were performed on a 350 cubic inch Chevy* engine with an aluminum block and cylinder heads. In each phase of testing, the engine was operated at 4,500 rpm until coolant temperature stabilized. As benchmarks for the test, straight water stabilized at 220°F and a 50/50 antifreeze/water mixture stabilized at 228°F.

 Temperature Reduction (in degrees Fahrenheit)
DOMINATOR COOLANT BOOST
Mixed with 50/50 Antifreeze/Water
8°F reduction
Mixed with Straight Water
25°F reduction

Cast Aluminum Alloys Corrosion Test
The Cast Aluminum Alloys Corrosion Test (ASTM D4340) measures corrosion protection properties in modern automobile and high-performance race engines with aluminum cylinder heads. A cast aluminum puck was heated to 275°F at 28 PSI and exposed to the test coolant mixture for one week. Weight loss of less than 1.0 mg is required to pass the test.

 ASTM D4340DOMINATOR COOLANT BOOST
(in straight water)
Water Only
Weight Loss in mg (1.00 max)
0.06
3.97

* All trademarked images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are AMSOIL-engineered for use in the applications shown.

Corrosion Test in Glassware
In the Corrosion Test in Glassware (ASTM D1384), six metal coupons constructed of the most common metals in automotive cooling systems were totally immersed in aerated coolant mixtures for 336 hours at 190°F. Each test was performed three times to determine the average weight change for each metal. The ASTM sets the allowable weight loss maximums for each metal.

ASTM D-1384
 
ALLOWABLE
DOMINATOR COOLANT BOOST
(in straight water)
WATER ONLY
Copper weight loss (mg)
10 max
1
25
Solder weight loss (mg)
30 max
0
62
Brass weight loss (mg)
10 max
0
23
Steel weight loss (mg)
10 max
1
18
Cast iron weight loss (mg)
10 max
0
29
Cast aluminum weight loss (mg)
30 max
0
91

Simulated Service Corrosion Test
In the Simulated Service Corrosion Test (ASTM D2570), six metal coupons constructed of the most common metals in automotive cooling systems were exposed to ASTM corrosive water designed to simulate hard and corrosive water in degraded coolant for 1,064 hours at 190°F. Coolant was maintained at a temperature and flow rate equivalent to the operating conditions seen in most passenger vehicles. Corrosive weight loss suffered during the test determines the additive’s corrosion protection properties. The ASTM sets the allowable weight loss maximums for each metal.

ASTM D2570
 
ALLOWABLE
DOMINATOR COOLANT BOOST
(in straight water)
WATER ONLY
Copper weight loss (mg)
20 max
3
66
Solder weight loss (mg)
60 max
0
120
Brass weight loss (mg)
20 max
2
59
Steel weight loss (mg)
20 max
0
54
Cast iron weight loss (mg)
20 max
0
117
Cast aluminum weight loss (mg)
60 max
0
89

Engine Warm-up Reduction Test
To test DOMINATOR Coolant Boost's ability to reduce engine warm-up times, the product was added to an antifreeze/water mixture in a V-8 test engine. The engine was run at idle until it reached a prescribed temperature of either 120°F or 180°F. Ambient temperature was maintained at 30°F to simulate winter conditions.

 Engine Warm-Up Time Reduction
30°F to 120°F
30°F to 180°F
Warm-up with 50/50 Antifreeze/Water Only
6.3 Min.
11.3 Min.
Warm-up with Coolant Boost Added
3.2 Min.
5.3 Min.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Material Safety Data Sheet (MSDS).

Click here to view the MSDS Data Sheet for AMSOIL RDCB.

Keep out of the reach of children. Don't pollute. Return used oil to collection centers.

AMSOIL Coolant Boost for Faster Engine Warm Up

AMSOIL's proprietary tiered surfactant technology allows efficient transfer of heat, which helps quicker coolant warmup to provide fast heat during winters and at the same time efficiently dissipate heat in the extreme summer temperatures.

Did this product meet your expectations?

(click on a star to rate)
Product Name:
Current Rating: 5 out of 5 stars
Total Votes: 1 vote(s)

Share your AMSOIL Experience
by writing a review
smaller | bigger





Click Here to Report Problems Or Comments
Receive AMSOIL's Confidential Factory Direct Wholesale Price List in your email.
Enter your first name & email address and click on "eMail Price List" button!
AMSOIL Online Store
AMSOIL Preferred Customer Program. Save upto 25%!
Wholesale Business Accounts
Become an AMSOIL Dealer!
Request FREE AMSOIL Catalog
Questions? Please Contact us
Order AMSOIL By Phone
AMSOIL Online Store
Order AMSOIL By Fax
VISA and MASTERCARD is accepted for US and Canada.
Discover and American Express is accepted for US customers only
Go to Top

Select your country.

Canada
Ships from Canada. Prices in CA dollars.
United States
Ships from USA. Prices in US dollars.