This article originates from the Amsoil Blog.  See the original via the link at bottom.

How Much “Synthetic” Is In My Oil?

Andy ArendtAndy Arendt|Aug 16, 2017 11:07 AM

Unlike food and drug companies, which must disclose the ingredients in their products, lubricant manufactures aren’t held to the same mandate, which can cause confusion if you’re shopping for synthetic motor oil. Store shelves are lined with oils described as “full synthetic,” “semi-synthetic,” “synthetic” and even “100% synthetic.” 

When you crack the cap on those bottles, what are you really getting?

A basic understanding of the different base oils available and a few rules of thumb help you cut through the clutter and make a more informed synthetic-motor-oil purchase.

Crude oil composition

Crude oil and refining are at the core of manufacturing the base oils used in motor oil. Crude oil is composed of roughly 98 percent hydrocarbons (atoms of hydrogen and carbon bonded together), which come in hundreds of different combinations. The remainder includes compounds like sulfur, nitrogen, oxygen, metals and salts.

Refining crude into base oils

Crude oil refineries work much like a whiskey still. The crude is heated to distill or separate hydrocarbons into cuts, which include propane, gasoline, diesel and base oils used to make lubricants.

Base oils can undergo additional levels of chemical processing that remove impurities and arrange the hydrocarbon structures. The type of chemical process can affect the cost and quality of the base oil.

API base oil groups

The American Petroleum Institute (API) base oil classification is divided into five groups and is based on the paraffin and sulfur content and degree of saturation of the oil. The degree of saturation has nothing to do with water; rather it indicates the level of carbon molecules completely saturated with hydrogen bonds. Greater saturation equates to greater uniformity and stability.

Group I

Group I base oils are the least refined of all the mineral-oil groups. They’re usually a mix of different hydrocarbon chains with reduced saturation and uniformity. While some automotive oils use these stocks, they’re generally used in less-demanding applications.

Group II

Group II base oils are common in mineral-based (conventional) motor oils. They offer fair-to-good performance in the areas of volatility, oxidation stability, wear protection and flash/fire point. They have only fair performance in areas such as pour point and cold-crank viscosity.

Group III

Group III base oils consist of reconstructed molecules that offer improved performance in a wide range of areas, as well as increased saturation and molecular uniformity and stability. These synthesized materials can be used in the production of synthetic and semi-synthetic lubricants.

Group IV

Group IV base oils are made from polyalphaolefins (PAO), which are chemically engineered, synthesized (synthetic) base oils. PAOs offer excellent stability, molecular uniformity and improved performance.

Group V

Group V base oils are also chemically engineered stocks that do not fall into any of the categories previously mentioned. Typical examples of group V stocks are esters, polyglycols and silicone. As with group IV stocks, group V stocks tend to offer performance advantages over groups I – III. An example of a mineral-based group V exception is white oil, a very pure lubricant used in industries ranging from cosmetics to food processing.

How much “synthetic” is in your oil?

Although there are no ingredients listed on motor oils, there are a few indicators that can be used to interpret the amount and quality of the synthetic base oil in the bottle.

  1. Synthetic blends (semi-synthetics) are just that – only partly synthetic, and the percentage of synthetic content can vary.
  2. While it’s not a hard-and-fast rule, manufacturers are open to greater scrutiny when they quantify a claim. Looking for claims like “100% synthetic” vs “full synthetic” or “synthetic” are an indicator that you’re likely getting more of the good stuff.
  3. Visit the manufacturer’s website and look at the product data sheet or technical data sheet for its oils. In this document, look for “Typical Physical Characteristics” or “Typical Technical Properties.” This section provides a high-level peek into the base oils used in the formulation. There are two numbers to pay attention to:
    1. Viscosity Index: Oils with a higher number include a better synthetic base oil that provides more protection to critical components over a wide temperature range by maintaining fluid thickness and the necessary fluid barrier between parts.
    2. Pour Point: measures the oil’s fluidity at cold temperatures and refers to the lowest temperature at which oil maintains its ability to flow. Lower numbers are likely to indicate a better synthetic base oil.

A word of caution

While base oils are a fundamental element in formulating motor oil and determining its synthetic content, they’re only part of the picture. Additives make up the other part of the equation, and the quality and concentration of additives have a significant affect on the oil’s ability to protect.

In essence, look for an oil that offers good overall protection, not just one that’s formulated with a specific type of base oil. A good way to identify a high-quality synthetic is to look for quantifiable performance claims. For example, we advertise AMSOIL Signature Series Synthetic Motor Oil‘s excellent wear protection, as proven in a real-world test. It offers 75 percent more engine protection against horsepower loss and wear than required by a leading industry standard.*

There’s nothing confusing about that.

*As required by a leading industry standard. Based on independent testing of AMSOIL Signature Series 5W-30, in ASTM D7320 as required by API SN specification.

Our contact info:

Your local Amsoil Dealer

Visit our online store and shop online at:
https://www.amsoil.com/?zo=5645033


Find a Retailer
Click here to find a list of our Amsoil Retailers

 

LOOKING TO BUY WHOLESALE?
DealerRetailerShop & Commercial Account inquiries welcome.
Contact us for more info.







   
   Copyright © 2004-2009 www.wboil.com
    All Rights Reserved